Completing the Pedestal Table
- Read Time: 2 mins
- Hits: 7191
In This article and the associated video we finally get to finish our little three legged - Pedestal Table. We have taken three videos and associated articles to arrive at this point, but it has all been worth it. We got to try a variety of specialty techniques like creating a round table top by using the circle jig that David Cooksey provided plans for. We showed how to make sliding dovetails which we used for the legs of the table and we showed how to create a 6 sided, or hexagon shaped column that we then turned on our lathe. Then of course we assembled the the table and finally finished it with Osmo, one of our favorite finishing products.
In this article we will only touch on the aspects we went through in the video primarily because we feel the video is self explanatory.
This was a great little project and the end results are well worth the effort. Nothing was terribly difficult but you will need to take your time to make sure all aspects turn out to your expectations.
Sliding Dovetails & Hexagon Column
- Read Time: 3 mins
- Hits: 11473
Sliding dovetails are one of the unsung joints that are seldom used in woodworking, too bad because they are not nearly as intimidating as they may seem and they hold fast and give lots of area for glue to grab on to making an excellent, tight joint.
In this video we are ultimately making a 3 legged pedestal table but in order to get to that point there are many steps and this is another one of those steps. We needed something to but the dovetail slots into so we needed to start off making a six sided or hexagon shaped column or post.
Using the correct technique on a table saw, a column like this can be cut accurately in a couple of minutes. The secret to cutting a hexagon column is to start off with a blank that is about twice as wide on one side as the other and length can be whatever you want. Set the angle of your table saw blade to 30 degrees (which conversely is 60 degrees off the table) and make your first cut, then flip the board upside down and make the second cut.
Making a Round Table Top With Circle Jig
- Read Time: 2 mins
- Hits: 12004
Well, we finally get a chance to use the router circle jig to cut out our round table top. For this we are using a 1/4" pure carbide bit. If you are really not familiar with carbide, it is not like some form of steel. The structure of carbide is that it is more like a crystal. This means it will break before it bends, unlike steel that will take a massive force, bend and bend and then finally break. Carbide bits are much more sensitive to side pressure and if you push them too hard, they snap and are now useless. The good thing about carbide and the reason we use it is that it has a very high boiling point. This means, that unlike steel, you can subject carbide to very high temperatures and it won't melt like steel does. When steel bits melt, even partially they become dull and that's why we like carbide, it stays sharp much longer than similar steel bits.
Remember, the point to cutting this table top is to ultimately use this top as part of our 3-legged pedestal side table which you can see in other related videos.
Making a Router Circle Jig
- Read Time: 3 mins
- Hits: 30807
Woodworkers are always making jigs. Sometimes a jig is used only once, other times it can be used hundreds or thousands of times. In this article and video we are making an adjustable circle jig for a router that has been designed and drawn by David Cooksey, one of our long-time members. David has been sending me plans and drawings of many different jigs and woodworking objects for some time now and we thought it was high time we let everyone else in on David's great ideas.
Today we are covering this circle jig, and you are welcome to down load your own version of it from our Plans section, and it's free ... and we all have David Cooksey to thanks for this. NOTE, you do have to be a member of woodworkweb in order to access our download section, but that's free too, and then you can access all the other plans and links to plans that we have put together for our members and subscribers. There is a short list of materials that you will need ....
Make a Wooden iPhone or Smartphone Case
- Read Time: 7 mins
- Hits: 24485
I'm not sure why, but some projects when we work on them turn out to be favorites, and this is one of my all time favorite woodworking projects. It wasn't that hard to do but it did take time and detail to make a good job. Of course it is a "one only case" which means there is no pattern, you have to make things up as you go along.
All I really knew when I started was that I wanted a wooden smartphone case and that the phone would need to fit snug into it so that the phone would not slide out and get broken, and of course it had to look nice. I didn't just jump into making this case, I have been thinking about it for over a month and just mulling it around in my mind and trying to think of any pitfalls before they arise.
Before you get started ... a word about safety!! Cutting small pieces of wood can be dangerous! always make sure your wood is secure when it is being cut and that your fingers and other parts of your body are well protected and away from any cutting surfaces. TAKE YOUR TIME and work safely.
The first thing of course is to select the wood. With small projects like this you really need to take your time selecting the wood. It should be one of the harder ... hardwoods and needs to have tight, straight grain.
There must not be any voids or cracks. In my case I selected a small piece of Arbutus or Madrona that has been collecting dust in my wood storage room for a lot of years. The chunk of wood is too small to do much with but for a project like this, it's perfect ...
Wine Rack
- Read Time: 7 mins
- Hits: 16510
Not everyone has the room, or the budget for a lovely wine room and for those who still like to have a few nice bottles of wine on hand, or to maybe show off some vintage collection, this little wine rack is perfect. It only holds 6 bottles but it is small enough to display your wine collection on a dinning room hutch, a side table, perhaps on a kitchen or serving counter and still look great.
All in all the wine rack is easy to build but there are a few things you need to keep in mind. The first and most important thing is that sizes are critical. In our case we were using 3/8 notches and 3/8" width wood and in order for the wood to fit the notches in a nice snug fit, the wood needs to be milled and sanded to a very accurate width.
The second most important thing to consider is the wood. You need to make sure the wood is a good, quality hard wood and that the grain is tight and straight-grained because it will be holding 6 bottles of wine, so any cross-grain wood will not be good.
Page 87 of 102