Making a Jewelry / Keepsake Box
- Read Time: 5 mins
- Hits: 8584
It's always fun making new things and seeing how they turn out, and if you get the chance to make something a second or third time, or even more, each version gets better and better because you learn quicker ways or building and you learn how to master the finer details too. I saw this little jewelry box somewhere and the design stuck in my brain as something I would like to build some day ... and someday has come.
I liked that it had substance, but also that it hand some curves to the design. It's not just a square, flat sided box, and it's nice to vary things once in a while. I started off with some rough sawn Alder and planed it down to 1-1/8". Since I had no plans, I just guessed at a size that I felt would look good.
The sides would be joined edge grain to edge grain, which is not the best way to hold wood together but by adding splines to the corners, the box would be very strong. The one thing I knew from making picture frames with 45 degree corners is that each of the opposite sides needs to be identical in length ... so the left and right sides need to be exactly the same length AFTER the 45 degree cut is made and the front and back sides also need to be identical in length. If they are not ....
Making a Tripod Dolly
- Read Time: 6 mins
- Hits: 6793
Anyone who follows my YouTube Channel will know that from time to time I am out doing vids in other people's shops, art galleries, shows and so on. I always use a tripod when I video tape, either inside or outside. When shooting inside I have often wished I had a tripod dolly with me. I checked them out on-line and found that most of them seem to start around $100 price and go up from there. After carefully looking at them, I think I can make something at least as usable as what I have seen but for a lot less money ... and for the amount I need it, the cost of a 3 wheels and a few nuts and bolts it should be fairly easy to make.
The only real disadvantage of mine is the arms will not be adjustable, which I really don't need or care about anyway.
It will fit all my tripods and that's all I care about. To figure out the size, I dropped a plumb-bob down from the center shaft of my favorite Slik Tripod and adjusted the legs to where I would like to have them for indoor shooting. I discovered that the length was 21 inches from the centre ...
One Tree Woodwork Exhibit
- Read Time: 2 mins
- Hits: 7344
Not everyone has the gift of "vision". It is one of those attributes that comes from true artistry and there have been many in the past who had ideas and visions of what they wanted to accomplish and some have become well know names like Frank Lloyd Wright, Charles and Henry Greene, Gustav Stickely, Thomas Molesworth, George Nakashima, Harvey Ellis and many many more.
Today, we have even more exceptional woodworkers with a flare for new and innovative ideas and once in a while we get a chance to see some of their creations and modifications all in one place. Such was the that at the recent One Tree Exhibit hosted by the Robert Bateman Centre in Victoria, British Columbia, Canada and in association with Live Edge Design. Robert Bateman of course is know world wide for is exceptional paintings, so who better to show of the works of fellow artist woodworkers.
The whole concept of the One Tree Exhibit was based on the concept that all the artists would use the one from the same tree. In this case, a big old Broadleaf Maple that had died some time ago which left portions of it spalted, some figured ...
Building an Album Table
- Read Time: 3 mins
- Hits: 4501
Well ... you may choose to call it something else, and you would not be wrong with whatever name you gave this handy little table. I has many uses and many names. I have been unable to find it earliest source or where it originated from which probably means version of this go back so far it is beyond recorded history of furniture making.
I have always wanted to make one of these little tables but always had concerns about the wood movement in the legs. Depending on the moisture content and the type and cut of the wood the legs could have a mind of their own in terms of bending and bowing. I knew the best way to combat this was to laminate the wood in the legs which goes a long way to keeping the legs stable, straight and very strong.
This method is nothing knew, I first discovered it when I had the opportunity to see in person some original Gustav Stickley furniture. One of the things I noticed on some pieces was that the legs were composed of 2 pieces of wood glued together. I was told, this was not because they didn't have the wood in the correct sizes, or could not get it, but that the pieces that were glued together were actually more stable as laminated wood with less tendency to bow and bend when subjected to varying humidity levels.
The information wasn't new to me, but what was new was that for some reason, to have Gustav Stickley using this technique seemed somehow legitimize the methodology. For some reason in my mind, I never really thought about the fact that all these amazing woodworkers of past had the same wood movement problems we all still encounter today ...
Milwaukee 12Volt Rotary Tool Review
- Read Time: 4 mins
- Hits: 7040
Dremel was the original rotary tool, and when it came out in the market in 1932 it was quite revolutionary. Mr. A.J. Dremel was apparently quite the prolific inventor and it was easy to see all the applications that a tool like this could be and so began the marketing of the bits and accessories.
Over the years others have come along to make their version of this popular rotary tool in an effort to provide customers with a convenient way easing into a specific line of tools. Milwaukee brought out their 12 volt like of power tools a number of years ago and since that time they have been adding tools and accessories to the line that all operate with the same 12 volt capacity batteries. Such is the case with this rotary tool version.
The tool itself is similar to many other rotary tools. One of the few added features of the Milwaukee version is display of battery charge left in the cell. While there are many battery operated rotary tools, few will let you know how much life is left in the battery before it needs recharging. That is one nice feature of the Milwaukee tool ...
Make a Box Joint Shoe Shine Tote
- Read Time: 6 mins
- Hits: 11018
On a previous video, I re-made the Lynn Sabin adjustable Box Joint Jig and adapted it to the router table. I had put off doing this as I already had one that worked fine on the table saw, but after many, many requests I decided to make a router table version unit of all our European subscribers who cannot purchase dado blades in most European countries. After building the jig and trying it out, I found I really liked this version. It seems much less dusty to operate that the same jig on the table saw that is using dado blades or even the dedicated Freud - Box Joint Blade Set, and the joints are nice and crisp with cleaner edges that what I was getting on the table saw.
I decided the next step should be to actually make project of some sort so I can really try out this jig and see how it really performs. As it happens, I had been in an Antique Store a few weeks earlier and had seen, what I called a shoe shine tote. A lovely little box, with box joint corners and some sort of a sole deck on top of the lid that could double as a handle.
I didn't have any plans and just went by what I had remembered when I saw the tote in the store. The only thing that really stood out for me was that the box joints appeared to be 1/4", which was perfect for this new router based, box joint jig.
Page 73 of 102