The Lost Art of Fuming Wood for Color
- Read Time: 7 mins
- Hits: 33795
We are in an age when changing or enhancing the color of wood simply means using one of the fine stains or dyes are readily available. It wasn't all that long ago that the to change or enhance the color of wood was something called Fuming. It's the same thing that mother nature uses, oxidization.
Mother nature does it naturally with oxygen, but we don't have decades to wait, so we can speed up the process with ammonia. The benefits of fuming wood is that you always get a consistent color, no need to worry about dye lots or color names on the can, and the coloring can penetrate the wood up to an eighth of an inch deep for a rich permanent coloration (not longer fuming is required for deeper wood penetration). The disadvantage is that different hues and tones are difficult to control because of differing wood types and length of fuming time and even colors withing the same woods, but we can see these with stains and dyes too.
To fume wood you only need four things, ammonia (more on this later), a plastic or glass (NOT metal) container (with a lid) for the ammonia to aerate from, and some sort of a sealed plastic tent or container in which to fume the wood.
Brushless Drill (Milwaukee) Overview
- Read Time: 5 mins
- Hits: 5651
For the purposes of this article, there are basically 2 kinds of electric motors, "brushed" and "brushless". Brushed motors have been around for about 150 years, but vast improvements in the early 1900 have left them almost unchanged since then, and for what they are, they are an excellent, efficient motors.
With the invention of the transistors in the 1960s, motor development took another step forward with the invention of the brushless motors. It is only because of higher technologies that these motors can work in a high enough efficiency to make the commercially viable because instant internal switching needs to occur.
Milwaukee of course have taken some of the early steps in this field by producing a series of brushless drills, Impact Wrenches and Hammer Drills.
In Brushed motors, there are something called brushes that make contact with a specific part of the armature of the motor, the part that spins. In a brushless motor there are no brushes, the spinning is done by using permanent magnets and and switching poles internally in the motor in order to make it spin. Here is a great video from Learn Engineering that explains in detail how this works and compares it with brushed motor ....
How-To Align a Table Saw Blade to Miter Slot
- Read Time: 6 mins
- Hits: 15863
Before starting any project, it’s important to take a few minutes to make sure all of your equipment has been properly adjusted. Your table saw will give the best results if the miter slot and the rip fence are adjusted parallel to the blade. If either of these are not parallel, your cuts and your finished work will be lower in quality, and the risk of kickback will be increased. Here’s how to make sure your table saw blade is aligned to the miter slot.
-
Disconnect the saw from the power source: A common sense step that is so easily forgotten when we’re excited to start a new project
Continued ....
How to Make a Barbecue Stand
- Read Time: 5 mins
- Hits: 6672
Portable barbecues are handy because they can be easily transported to a variety of events, like birthday parties, family gathering, picnics, camping trips and much more. The disadvantage is that they need some sort of a stand to sit on to make them comfortable to use, but often there is a picnic table or something similar handy to use. Unless ... you want a dedicated stand for them, then you either need to purchase the accessory or make your own, which is what I did.
Initially I was a bit concerned about having a portable barbecue sitting on a wooden surface, but after using my own, on a wooden surface for 2 years not seeing any sign of even paint discoloring, I am pretty confident that wood works fine for my barbecue, others may not, so before you build your own, that will be something you will want to check. Regardless whether or not you use the table for a barbecue or not, it is still a great, solid little table that would be fine as a serving table to hold any number of food and drink items, or what-have-yous.
I started off with the legs, I wanted them to be at least 1" thick, just because a table looks more substantial with stronger legs. All the cross members are 3/4" material.
Building a Small Parts Storage Cabinet
- Read Time: 4 mins
- Hits: 11833
I seem to go through phases where I have this need to re-organize my stuff and it's often triggered by an event. Recently I lost the little mounting foot that goes in the head of my small Gorilla Tripod. Oh sure you can buy new ones, and have them shipped to you but most of the ones I saw, with shipping, are about the same price a buying a whole new tripod! Eventually (2 months later) I have found the missing foot and all is well again, but it made me realize I have camera and video gear in at least 3 different places and it's time to get it all in one place ... the workshop where it is being used.
The real problem with all these bits and pieces is that they are currently being stored in little plastic rectangular trays, which work ok, but they take up a lot of shelf space because you can't store something above them like you can with a little cabinet with drawers. And that was my motivation.
I had some other ideas along the way, like having something with a Dutch Door or half door so that if you had something lying in front of the little cabinet, you could still open the door without knocking something on to the floor. I also liked ....
Making Wooden Signs - Video Collaboration
- Read Time: 5 mins
- Hits: 7259
I love learning new things about woodworking, and it seems that every day I learn something new. I especially love it when I find people who are doing things that are outside of what we normally expect, and wooden sign making is one of those areas.These are the kinds of people I like to highlight because they work hard and give freely of their information and knowledge.
For years I have assumed that really the only way to carve signs of any quality was to use a CNC machine, connected to a computer running special software, that can take quite a while to learn how to use. Some time ago I was shown that, with a little bit of practice, some fairly common tools and little bit of instruction, it is possible to makes some outstanding wooden signs.
Eric and Dave Rhoten, the father and son team, have spent many successful decades in the wooden sign making industry and are now showing how everyone how they can make their own wooden signs on their website davesigns.com and their YouTube Channel oldave100.
It seems like they have made about every kind of wooden sign that anyone has dreamed up because between them they have an enormous wealth of information. They are frequently releasing new videos that answer viewers questions on sign making and give tips, ideas and suggestions on the best way to make wooden signs. (and scroll down for direct links to their 2 videos on making the woodworkweb sign) ...
Page 70 of 103