- Read Time: 5 mins
- Hits: 14747
Inlaying wood is a great way of adding a special detail to a wood project. In the past, and to a certain extent even today, inlay work is done by hand by cutting shapes and strips of wood along with the pockets they will be fit into and eventually glued into, but there are are other ways of allowing machinery to help us with some of these tasks.
How to Use the Wood Router Inlay Set - Freud Tools Inlay Set
Of course, one way of making inlays is through CNC cutters or even through laser etching, but for this episode, we are using the good old wood router that has been around for decades and never seems to run out of things it can do ...
- Read Time: 5 mins
- Hits: 9208
A short time ago set up a finger joint bit on my wood router table to see how it worked, having never used it before. A number of people asked how it compared to other, less expensive finger joint bits, to which I had no experience, so I ordered one from Gearbest.com and here are the results of that setup and testing.
Reversible Finger Joint Router Bit - Coarse Tooth Finger Joints
This bit is quite a bit bigger and heavier than the last bit I tested and has much coarser teeth. In the world of finger joint bits, there are a variety of sizes and one size is not better than another, but different sizes would be selected for different kinds of work that need to be done. This coarser tooth would obliviously be used for larger pieces of wood in joint them together.
- Read Time: 5 mins
- Hits: 9383
There are many things that wood routers can do and even more when you start adding the many accessories to them and one of these is something called router "bushing". In quick simple terms, what these bushings do is attach to the base of the router and allow the router bit to protrude through them which in turn makes them useful as a templating tool.
Wood Router Bushings and Router Bit Speed Settings
The templates are the real secret to using router bushings ...
- Read Time: 4 mins
- Hits: 11188
It seems that every table saw I have ever had, has always come with a functional but very basic miter gauge, and even the last saw I purchased, which was a higher end saw, still came with what I consider to be a pretty useless, basic and hard to use - Mitre Gauge, then one day it fell off my table saw onto the floor and broke the tightening handle, which I fixed with a wing nut and have used for a few months, but now it's time for me to invest in a better miter gauge that will be less frustrating to use, easier to set up and maintain accuracy..