Assuming dowelmax is required, the following 47 results were found.
-
I guess having lived most of my life as a bit of a skeptic, I frequently find myself questioning whether things I see or hear of and just how accurate they are. I woodworking we have many things that are shared between woodworkers that are not quite as...
- Type: Article
- Author: SuperColin
- Category: General Woodworking Videos
-
and easy to work with. I first decided on size, then cut sides and the top to width and length I needed. I opted to use my Dowelmax for the joinery because I wanted strong, hidden joints but still something easy to work with. Thinking ahead, I decided...
- Type: Article
- Author: SuperColin
- Category: Furniture Making Videos
-
cabinet. The Carcass This part of build was easy, I have these for 30 years, though my methods have changed due to the Dowelmax Jig, quicker, stronger and easier. The 2 things I didn't have we old books I could re-purpose and suitable hinges. As a lover...
- Type: Article
- Category: Furniture Making Videos
-
planed a new piece I got more excited with the new idea. To make sure the stand was super strong, I used 3/* dowels in my Dowelmax Doweling Jig and found 4 dowels was more than adequate. If you have followed my channel for a few years, you may recall...
- Type: Article
- Author: SuperColin
- Category: Woodworking Tool Videos
-
great, I just don't use them much anymore, have fallen to another technique that I like, and that works well for me, the Dowelmax systems... but that doesn't mean I have abandoned clamping cauls, they are still invaluable for certain jobs... There are...
- Type: Article
- Author: Colin
- Category: Wood Joinery Videos
-
more closely to the bottoms of each hole to ensue a good hold. For any of you who are new to these videos, I am using the Dowelmax.com doweling jig. After gluing two of the side up, I decided to make the cross frames for each of the 4 sides of the...
- Type: Article
- Author: Colin
- Category: Outdoor Woodworking Project Videos
-
that for this little table I would prefer to have a bit more strength that what pocket holes would give me so used my Dowelmax doweling jig, with a bit of glue... the table legs and apron was assembled in no time... and it was already pre-finished....
- Type: Article
- Author: Colin
- Category: Furniture Making Videos
-
cut and distress all the stretchers for the side and front and back. I also decided ahead of time that I would be using my Dowelmax jig to for the joints so they would nice and strong and easy to construct. Next I began making the horizontal side...
- Type: Article
- Author: Colin
- Category: Furniture Making Videos
-
Dowels are quick, easy and strong. I did want a large "reveal" on the sides and thanks to the amazing versatility of the dowelmax jig system, after a bit of thought, I found it was up for that job too. Be careful when you do a dry fit when using dowels,...
- Type: Article
- Author: Colin
- Category: Furniture Making Videos
-
I could have used pocket holes, but I have found pine a bit soft and sometimes the screws strip to ended up using my Dowelmax jig which would give a nice strong, hidden joint. Once the base was made, I next needed to make the upper carcass, but before...
- Type: Article
- Author: Colin
- Category: Furniture Making Videos
-
of jigs is a necessary element to help us work safer, quicker and more effectively. For some time I have been using the Dowelmax doweling jig and it has opened up a whole new world of woodworking for me because I can make things quicker, more accurate...
- Type: Article
- Author: Colin
- Category: Woodworking Jigs
-
I cut at 12 inches by 20 inches and used 3/4 inch thick material for this. For me, attaching the legs was easy with my Dowelmax doweling jig that I use frequently because it is dead accurate and makes a super strong joint. I always like to have some...
- Type: Article
- Author: Colin
- Category: Furniture Making Videos
-
of all furniture making apply to these tables during construction, but in my case I changed thing a little by using my Dowelmax doweling jig which allows me to make very strong, highly accurate furniture much, much quicker than using tradional mortise...
- Type: Article
- Author: Colin
- Category: Furniture Making Videos
-
it worked well then so decided to try them again this time... and they worked perfect. For those not familiar with the Dowelmax Jig, you can find it on that link. This was the perfect solution for this wood, it allowed the uneven face of the frame to...
- Type: Article
- Author: Colin
- Category: Box & Picture Frame Topics
-
One of the reasons there are so many different woodworking jigs is that one jig that does a specific job, may not necessarily perform a similar job when needed, or it may be too cumbersome to use. Such is the case with this Table Saw Mitre Gauge...
- Type: Article
- Author: Colin
- Category: Woodworking Jigs
-
flat, straight joint. In order to make the top as flat and even as possible and save myself some time sanding, I used my Dowelmax doweling jig to align the 2 tops. A number of years ago I would have used my biscuit joiner but since acquiring this...
- Type: Article
- Author: Colin
- Category: Furniture Making Videos
-
you can change bits, adjust router motor speed and make fine adjustments. The router lift version we selected was from www.dowelmax.com . What we particularly liked about this unit, aside from the fact that it's easy to install and works on probably...
- Type: Article
- Author: Colin
- Category: Woodworking Tool Videos
-
which as usual, did an outstanding job. There are a few ways of attaching plywood pieces together, but because I have the Dowelmax, Doweling Jig, and it does such an outstanding job, I decided that would be the easiest and probably the strongest holding...
- Type: Article
- Author: Colin
- Category: Furniture Making Videos
-
also made their own version of, but that is also commercially available like the one I have. The version I have is sold by Dowelmax.com I think the one feature that sold me on this unit is just how accurate I can be in setting the bit height because I...
- Type: Article
- Author: Colin
- Category: Woodworking Tool Videos
-
the bit is the correct height. For those who have not seen this in my previous videos, you can check out details at www.dowelmax.com The reason I mention the lift is because another bonus to this is that it allows room between the base of the lift and...
- Type: Article
- Author: SuperColin
- Category: Woodworking Tips Videos