Assuming dowelmax is required, the following 47 results were found.
-
that can give you perfect joints without a lot of fuss, that are super strong and precisely located" then I discovered the Dowelmax and it became my only joint-making tool for all the reasons I just listed. I made this article and video to use as a...
- Type: Article
- Author: SuperColin
- Category: Woodworking Jigs
-
I made a whole video on Fix you Biscuit Joiner here Dowel Solutions Somewhere around 2010, I discovered a tool called the Dowelmax. It instantly changed how I did woodworking. Its primary use for me was joint making, which meant I could confidently stop...
- Type: Article
- Author: SuperColin
- Category: General Woodworking Videos
-
was high time I got up to speed on doweling jigs. As a bit of a newcomer to doweling technology, and after un-packaging my Dowelmax jig, I was very impressed by the quality of the jig. The number of well thought out accessories and add-on components was...
- Type: Article
- Author: Colin
- Category: Wood Joinery Videos
-
corner of the legs. Skirt 2-1/2" x 3/4" x 24-1/2" & 2-1/2" x 3/4" x 10-1/2" Next, I began cutting the dowel holes with my dowelmax jig. I have been using the dowelmax jig for many years now and I can't imagine building without it now. It gives me very...
- Type: Article
- Author: SuperColin
- Category: Furniture Making Videos
-
in the top hole and make an indentation that would give me the location of the top hole. The second hole was made using my Dowelmax jig with the top hole aligned with the Dowelmax locator pin. The locator pin goes through one hole in the Dowelmax then...
- Type: Article
- Author: Colin
- Category: General Woodworking Videos
-
Frequently Asked Questionshttps://woodworkweb.com/faqs/917-frequently-asked-questions.html
is the description box of the video or use the Search Box with one or 2 key words Where can I get more information on the Dowelmax doweling Jig? Contact them directly at www.dowelmax.com When can I purchase the plastic Mitre Blank material you show in...
- Type: Article
- Author: SuperColin
- Category: FAQ
-
wants to use "floating tenons", the doweling jig, once again is a perfect solution. The doweling jig I use is called the dowelmax, (dowelmax.com) I prefer this one because it can be set at pretty much any angle, depth or location I need. A...
- Type: Article
- Author: SuperColin
- Category: Furniture Making Videos
-
reading up to 1 inch deep into the wood. Available from the woodworkweb Amazon Page HERE And last but by no means least Dowelmax doweling jig. This tool changed my woodworking direction within 1o minutes of me receiving the tool. I love this tool and...
- Type: Article
- Author: SuperColin
- Category: Woodworking Tips Videos
-
something I have had to do on a few occasions, and that's all part of woodworking. As I mentioned in the video, I use the Dowelmax dowleing jig, not only for making all my wood joints, but also for joining wood, ie for glue-ups of boards to align the...
- Type: Article
- Author: Colin
- Category: Woodworking Tool Videos
-
decor. Part 2 of this build is making the doors, and to keep to the theme of this build, we needed to make them using our dowelmax jig, just as we made our past video using only pocket hole technology. As a rule, when making doors, I prefer to make them...
- Type: Article
- Author: Colin
- Category: Furniture Making Videos
-
required or can use rabbeting cut Requires specialized doweling jig (which can also be used for MANY other things) Note: Dowelmax available from www.rockler.com or direct from the distributer Dowelmax.com Copyright Colin Knecht woodworkweb Article -...
- Type: Article
- Author: SuperColin
- Category: Beginners Woodworking Videos
-
which you can add later, or make your own and at only $99 it's a great place to start making very strong, quality joints. Dowelmax is widely available and you can check out their main website here.... dowelmax. Next on my list is the Milwaukee 12 volt...
- Type: Article
- Author: Colin
- Category: Woodworking Tool Videos
-
joints, rabbet joints, box joints but we opted to make ours 45 degree joints to utilize a prototype doweling device from Dowelmax who very kindly provided us with the tool to evaluate. We found it very easy to use, and as usual for a Dowelmax tool very...
- Type: Article
- Author: Colin
- Category: Furniture Making Videos
-
all the exposed screw holes after, and I felt that a bit more strength was needed so I opted for using dowels with my Dowelmax jig. You could use mortise and tenon if you feel the need to use traditional woodworking techniques. Before the final assembly...
- Type: Article
- Author: Colin
- Category: Furniture Making Videos
-
sides of the carcass of the frame, making sure to leave enough space for joinery, which, after little thought I picked my Dowelmax jig, just because it is quick, easy and makes strong joints. As a side note, one of the recent additions to my doweling...
- Type: Article
- Author: Colin
- Category: Woodworking Tool Videos
-
look better with a thicker seat. I glued 2 pieces of wood together after planing and edging one side of each. I used my dowelmax jig (dowelmax.com) to position the wood for gluing so that there would be little or no slippage with the glue and the sides...
- Type: Article
- Author: Colin
- Category: Furniture Making Videos
-
drawer is mostly grinding, filing, punches, chisels, and hole making... all somewhat related My favorite drawer is my Dowelmax drawer where I keep both my Dowelmax jigs and all the other sized center blocks, the matching drill bits, and a small supply...
- Type: Article
- Author: SuperColin
- Category: Shop Tour Videos
-
with the board glue-up after determining the wood was dry enough to use at 10%. As you can see in the video, I also use my Dowelmax jig for glue-ups, I does take tiny bit longer than using a biscuit joiner, but the accuracy in the boards glued up is...
- Type: Article
- Author: SuperColin
- Category: Furniture Making Videos
-
and rugged enough to withstand being moved around from time to time... so, the strongest joinery is to use dowels and my Dowelmax doweling jig. I purposely am not showing a lot of the techniques in this video but if you want to see all the things this...
- Type: Article
- Author: SuperColin
- Category: Furniture Making Videos
-
One of the nice things about woodworking is generally we rely on the strength of the wood, softwoods are not so strong while hardwoods are much stronger and man-made woods can vary either way, but jointing them together presents a whole new world of...
- Type: Article
- Author: SuperColin
- Category: Wood Joinery Videos