Off Canvas sidebar is empty

Read Time: 2 mins
Hits: 2524

Many more cool tips today and the one I especially liked was Eric's idea of extending the cross-cut capacity of my table saw cross-cut sled, but you will see that further on down the article ...

Watch it on Youtube: https://youtu.be/XQ6oCqS_6kI

Today I am going to start off with Brian's idea of using a sheetrock or gypsum sheet sander as a bush block ...

Read Time: 5 mins
Hits: 2621

Imagine my excitement when I noticed some GREEN spalting on a split firewood log I was helping to unload. Green spalting! I had never seen it except in pictures and there wasn't very much of it, but enough that I thought it was worth trying to culture a new growth of it and perhaps spalt my own Green-Wood !! Read to the end to find out what I discovered.

Watch it on Youtube: https://youtu.be/9_MCi2ysjRE

Roll forward about a year, and the wood I was carefully attempting to spalt had been in a moist plastic container and on the outside of the pieces of wood showed strong signs of fungus growth and hopefully would reveal Green inside ... 

Read Time: 5 mins
Hits: 4208

Many woodworkers would love to sell a few items they make just to pay for the wood, sandpaper, and finish product they use so that they can replenish their stock and in an ideal world maybe even sell a wee bit more to pay for a new tool. Wouldn't that be nice!

Watch it on Youtube: https://youtu.be/vf-oOK5wXOc

Most woodworkers that I know are not really interested in going "into the business" of woodworking, they just want to be able to sell enough to cover their costs. Not an outlandish request, and the first thing they think about ... is what product can I make that will sell?  But there is MUCH MORE to selling than just picking a product as you will see later on in this article ...

Read Time: 6 mins
Hits: 2463

Some days I just love being in the workshop puttering around a doing a variety of things that need to be done, repairs, small builds, and generally making things safer and easier to use ... 

Watch it on Youtube: https://youtu.be/b4xySiKGdAo

Today I needed to clean out the insides of my table saw. The blade is getting hard to move up and down and that usually signals me that there is some sawdust build-up that needs to get cleaned out ...

Read Time: 7 mins
Hits: 2422

I like to try and have a theme for all my videos but when it comes to subscriber submitted tips, it's hard because it is so varied, but today I managed a bit of the theme with glue and finishing ... 

Watch it on Youtube: https://youtu.be/AvAdj4TA2Bw

One thing I have found in the past few years of doing these tips videos is just how much some product differs from country to country, even with countries. For example in the US, someone in California is purchasing 2 part epoxy glue in bottles whereas someone else in says Georgia can't find it in bottles, only in squeeze tubes and different brands altogether... but no matter, we all have a pretty good idea what how these things work. 

Read Time: 4 mins
Hits: 12694

I finally broke down and purchased a Digital Angle Finder or Inclinometer as some call them. Basically, they are a small box that after being "centered" they can be tipped to one side or the other to measure the degree of angle, simple ... or so I thought.

Watch it on Youtube: https://youtu.be/PWYEq-RM1v0

Someone gave me one of these well over 10 years ago, he told me that he had owned for a while but that it didn't seem to work correctly and that I could have it and if it didn't work, I was to throw it away, he didn't want it back. Well, after fussing with it for a time, I chucked it out and let him know, that he was right it was not working and I disposed of it ... roll forward about 15 years ..

  1. Woodworking with Plywood - What You Need to Know!
  2. Subscriber Submitted Workworking Tips - Episode #30
  3. Woodworking Tips You'll Actually Use! Subscriber Submitted Tips #31
  4. Sanding Tips including 3M Xtract™ 710W Net Sanding Discs
  5. Watch This Before Using a Wood Thickness Planer

Page 12 of 102