Subscriber Woodworking Tips and Tricks Episode 15
- Read Time: 4 mins
- Hits: 5322
There are many good woodworking tips and it's sometimes hard for us to remember them, but we really don't have to. Our brain will often pop that image back into our mind's eye when we encounter some sort of challenge in the workshop, and instantly, we have a solution.
Subscriber Woodworking Tips and Tricks Episode 15
Such is the case with Timothy's idea of using the blocks and a simple ratcheting tie-downs for clamping picture frames. I have used a ratcheting tie-downs in the past, but only with special cut corner brackets .. and yes they work fine, but just using the tie-downs with wooden blocks works just as well and is quicker and easier ...
Magswitch Switchable Magnets Workholding Tips & News
- Read Time: 8 mins
- Hits: 7814
Magswitches seem to have an endless number of jigs that can be adapted to them or made with them. In my shop, they have become an invaluable tool for a variety of jigs that save me a lot of time and since I work alone, they are like another pair of hands in many cases.
Magswitch Switchable Magnets Workholding Tips & News
This tip was sent to me from John, who has figured out a way to use Magswitches in conjunction with a carpenter's square on the top of his table saw to create a large, perfectly "right angle" assembly station that can be set up and taken down in seconds.
*** Links to other articles and new fence located deeper in this article ***
Fixing Woodworking Mistakes Episode 3
- Read Time: 7 mins
- Hits: 6690
Working with wood is not always an exacting science. Sometimes there are defects in the wood, both visible and hidden and once in a while, we woodworkers make innocent mistakes and most of these issues need to be fixed or corrected one way or another. Most of these fixes are not complicated, but often will take some time and patience to do a good job.
Fixing Woodworking Mistakes Episode 3
From time to time woodworkers are called upon to fix problems with wood items like furniture or other home units, that have broken, or maybe we set a tool wrong and made a bad cut ...
Starbond CA Glue Tips & Tricks in Woodworking
- Read Time: 6 mins
- Hits: 6693
I have come to rely on CA Glue, or Cyanoacrylate glue in my workshop as a big time saver, especially in fixing little problems that arise from working with wood, but many other things in the shop as well and it's no secret I prefer Starbond because the variety of glues and it's freshness, and I enjoy working with businesses that provide quality products.
Starbond CA Glue Tips & Tricks in Woodworking
There are just so many uses for an instant bonding glue in the workshop, I seem to find some new use for it almost every week ...
And thanks to the nice people at Starbond who have sponsored this video, AND they are offering 15% off Starbond CA products by using discount code 'Woodworkweb' at checkout - - https://www.starbond.com/?rfsn=2309039.76b483
Best Results for Woodworking with Pine Wood
- Read Time: 4 mins
- Hits: 11311
The one thing that every woodworker has in common is what woods to use, and for those who are new to the hobby and often working on a limited budget because of ... maybe some investment in tools ... is the cost of wood. And one of the more common woods that new woodworkers will select is pine for a number of reasons.
Best Results for Woodworking with Pine Wood
Pine is easy to find almost everywhere, it's fairly economical, often quite flat, light to handle, and easy to work with because of the softness of the wood and it can be transformed into many looks with stains and dyes, but Pine has one drawback ...
Workshop Tips and Tricks
- Read Time: 6 mins
- Hits: 8105
In this episode I have a mixed bag of my own and other peoples tips and tricks to share, for all around the workshop to save you time, sometimes save you money, and always to help get the job done more conveniently ...
Workshop Tips and Tricks
The first tip is something I learned a long, long time ago and haven't used for many years, but popped back into my brain a few days ago when I need to draw some parallel lines and I remembered this trick ...
Page 24 of 104