WoodWorkWeb - Woodworking Community

3 Ways to Edge Joint Wood Without a Jointer

Read Time: 6 mins

Edge jointing wood is one of the most important things that woodworkers will do. Without straight flat edges to work with the rest of the project will be difficult at best to bring together and may not even come together if the joints cannot align with one another. Further, if you are gluing narrower boards together to make the wider board, edge jointing is critical to get matching edges.

Watch it on Youtube: https://youtu.be/Xli8yTT58Lk

In ideal shops, we use a machine called a "jointer" to do this task, or if working without machinery a hand plane is used, but there are other alternatives, and some of these may even be used by advanced woodworkers in special situations ...

** CHECK OUT** PODCAST of Daniel Carter with Colin Knecht (approx 45 min.) listen here - http://bit.ly/2XU8HQL

Workshop Tricks You Need to Know!

Read Time: 3 mins

I'm not sure why so many of us are fascinated by woodworking tips and tricks. I love finding easier are more efficient ways of doing things and sometimes just experimenting with who to do something is reward enough. I have also learned a lot from other woodworkers and through friends at woodworking clubs and guilds, they are a warehouse of knowledge.

Watch it on Youtube: https://youtu.be/KEE2d2XV4vI

One of the highlights a guild I belonged to many years ago, was a kind of show and tell where some would show off their work while others show how they achieve certain woodworking techniques, like sharpening of <everything>, cutting difficult angles, and all sorts of cool and interesting ideas.

Watch This Before Buying Spiral Router Bits

Read Time: 4 mins

Spiral Bits are the one set of bits that can be confusing for many woodworkers. The main reason for this is the description given for these actually changes depending on where the bits are installed, in either a handheld wood router or CNC router, or ... upside down in a wood router table.

Watch it on Youtube: https://youtu.be/hTlx3FH39Bs

The nomenclature for router bits is - when the bit is vertical and the tip of the cutting edge is at the bottom of the bit.
Thus a Spiral Up Bit would have the cutting edge at the bottom of the bit and as it rotates in the wood it will drive the wood chips up the flutes and the tear-out will also be driven upward, which if cutting through the wood, will give clean cuts at underneath the wood.
Conversely and Down Spiral Bit will have the wood chips and any tear-out drive down into the wood or if cutting through the wood, the wood chips and tear-out will be in the bottom of the wood whereas the top of the cut will be clean.

Subscriber Submitted Tips and Trick #17

Read Time: 6 mins

It's interesting to me how woodworking tips on one topic and lead to another tip on a different topic, even when they are not related. Like saving glue (which is not one of the topics of this article) and how that can spin itself into getting better use from paints and finishing products (which is here ... later on).

Watch it on Youtube: https://youtu.be/RuYRuaxdA9g

In these cases, personally, I am less concerned about the costs of replacing the materials which compared with the lost time in productivity not to mention the workflow time, which is often far more expensive than the materials. For me, it's frustrating to open a can of paint or similar finishing material and find that it's dried out or has formed such a thick top crust it almost makes the material valueless especially if you have to pick out chunks of dried paint or whatever inside before you can even use it ...
** CHECK OUT** PODCAST of Daniel Carter with Colin Knecht (approx 45 min.) listen here - http://bit.ly/2XU8HQL

Mobile Clamp Rack for Wood Clamp Storage

Read Time: 6 mins

Wood clamps are a MUST for every woodworker, in fact, I have heard it said many times "you can never have too many wood clamps" and I know there are many times this is true, and for me, they often seem to be just out of my reach when I need them most.

Watch it on Youtube: https://youtu.be/5mW-FSzR96w

I recently decided to upgrade some of my very old and original pipe clamps with some new bar clamps from Bessy ... and try them out. So far I have three different kinds and I do like them, the problem now is that they don't really fit in the rack that I build many, many years ago, so time to re-vamp the workshop one - more - time ...

6 Quick Subscriber Woodworking Shop Tips - Episode 16

Read Time: 4 mins

I'm not sure how I got mixed up in my numbering sequence for the Subscriber Tips and Tricks, but I think I have it sorted out now ... but at least the content is the same ... and this episode doesn't have a theme because I just picked a few that really stood out for me as some of the ideas that I know I could use in my shop ...

Watch it on Youtube: https://youtu.be/bOYa0DUwcKw

What I liked about all of these submissions, they were simple, to the point, and easy for most of us to be able to use in our shops.

Page 21 of 103