shop made jigs

The table saw is easily my favorite tool. For me, it is amazingly versatile in what it can do and when you start adding jigs to it, the table saw can do some amazing things. I am currently on my fourth, and possibly my last table saw. Since none of my saw, including this one, hand the same fences, many of my jigs I have had to re-make, including this bevel cutting jig. Hopefully this version will also be my last because I am going to make it with a small amount of adjustability in mind. Something I neglected on my last versions. To be honest, the last versions of the Bevel Cutting Jig that I made, were all rushed together quickly to satisfy an immediate need. This one I am making without that immediate need and with the knowledge that I will be using it in the future.
The biggest problems I had in the past with this jig was - storage. All my jigs needed to be stored in an unheated outdoor shed. This means the wood moved a lot. In the winter it is cold and damp and the wood expands to around 14% moisture content. In the summer it's often hot and dry the wood shrinks down to 8%. Now all this is not huge, but when you are working with close tolerances, like on a metal table saw fence. A jig I make in the summer, will certainly not slide back and forth on the table saw fence in the winter, in fact, some won't even fit over the fence they have expanded so much.

Watch this and other similar videos on YouTube - https://youtu.be/r4FNdr1VO0M

This time I am going to select my wood carefully and make the part the slides over the table saw fence, slightly adjustable without having to take it apart and re-make it...

I love making woodworking jigs, it's fun and intereting to see what improvements of adaptions can be made to suite every different woodworker's needs. This jig has been around for many, many years and has changed little during that time. Rather than follow one of the plans that are readily available on-line, I decided I needed to make this jig to fit my own needs that may or may not be available in the plans someone else has created. My main objective was to ensure that both legs of the jig would straddle the insert throat plate in my saw, after all, that was the whole purpose... to build a jig that would accurately set or measure the distance from the top of a table saw blade to the top deck of my table saw and not to a measurement from the top of the blade to base of the throat plate, which is often the case.

To start off with I would need something thicker than 3/4 inch material for the main body of the jig because I wanted to use one of my plastic off-cuts of mitre slot material. I wanted something harder than many woods as this jig will be used a lot and I don't want the measuring arm to get dinted and chewed up by the table saw blades over time.

Watch this and other similar videos on YouTube - https://youtu.be/wbNhRwEAzTM

I started off with a block of wood that was 8 inches wide, 5 inches high and 1.25 inches deep. From this block, the first thing I did was to carefully cut a dado slot that would fit the plastic mitre slot material I wanted to use as the center measuring post....