make your own furniture,

Sitting benches have been around in various forms for perhaps thousands of years. They may well have been one of the first forms of formal seating as they can be made from very basic materials and utilize a many different kinds of options for legs or supports. I have long held a love of live edge wood and try to incorporate it in as many things as I can, and especially when the project lends itself to using this kind of wood. This build, the natural edge sitting bench has been on my list for quite some time but finding the right piece of wood for the top was more elusive than I expected.  When I spotted this spalted maple, live edge board I immediately envisioned a sitting bench with contrasting woods.

 
Watch this and other similar videos on YouTube - https://youtu.be/Rduh4YoFPZU

The board was still fairly wet when I purchased it and wasn't much longer than it is now so I didn't have a lot of wood to waste on the ends. It already had a small crack in one end when I got it, but hoped that drying it slowly would preseve the crack from creeping..... It did not.... the crack continued to grow as the board dried...

Some furniture pieces are timeless and such is the case with these little splayed leg side tables. They are still as popular today as they were decades ago and little has changed. They seem to fit many decors with their tapered legs and small size, they can easily fit in a blank corner, or become a stand or showcase for artworks, plants or pictures, and they are not difficult to build despite their somewhat complicated look with the splayed legs.
Like all small tables, these want to at a comfortable "sitting height" which puts them around the 24 to 25 inch height so they are comfortable to use for anyone sitting down, which is another reason they are often called side tables, as in a table beside a chair or sofa. Most of what I have seen have been a solid color for whatever the wood they were build with, but in my  case I decided to make something a bit more showy by making the legs and the top of different colors.

 
Watch this and other similar videos on YouTube - https://youtu.be/n6gszgwQQG0

I stared off with the legs that were 25 inches long and 1.25 inches square. I set these up on my tapering jig on my table saw so that the blade would leave about a 3/4 ionch square at the bottom and disengage from the top at of the leg about 6 inches from the top. then carried on a cut all 4 legs with this taper.