lumber

I don't think there is wooden article that is more diversified than doors. There are thousands upon thousands of different doors in all shapes and sizes, with and without window, highly decorative and exotic to plain and funtional. For this project I am building a door for my outdoor storage and garden shed. I built the shed a couple of years ago and the only door I had that fit at the time was interior door which is not really suitable for putting a good solid lock on, so the goal here is to make a sturdy, functional door that also happens to look nice that can be used to replace that interior door.
For the wood, I will be using a reclaimed Douglas Fir beam about 10 feet look that should contain enough wood to make the entire door if I cut it properly. The beam has been planed flat on one side but otherwise is rough. Three of the sides have also been stained. I do not want to run any of the stained sides through my jointer or planer if I can avoid it. Almost all stains contain some form of dirt that is used for the coloring of the stain and this dirt can be very hard on blades and contribute quickly to their dulling.

Watch this and other similar videos on YouTube - https://youtu.be/Y9sLByuKXrU

The first order of business is to cut the beam to a rough length to make it manageable to handle. The door size is 76 inches by 28 inches so with that in mind I began by cutting the beam to lenght, then in order to cut some widths, it needed to be run through the joint to make at least one edge flat and straight...