Making a Splayed Leg Side Table

Read Time: 6 mins

Hits: 9494

Some furniture pieces are timeless and such is the case with these little splayed leg side tables. They are still as popular today as they were decades ago and little has changed. They seem to fit many decors with their tapered legs and small size, they can easily fit in a blank corner, or become a stand or showcase for artworks, plants or pictures, and they are not difficult to build despite their somewhat complicated look with the splayed legs.
Like all small tables, these want to at a comfortable "sitting height" which puts them around the 24 to 25 inch height so they are comfortable to use for anyone sitting down, which is another reason they are often called side tables, as in a table beside a chair or sofa. Most of what I have seen have been a solid color for whatever the wood they were build with, but in my  case I decided to make something a bit more showy by making the legs and the top of different colors.

 
Watch this and other similar videos on YouTube - https://youtu.be/n6gszgwQQG0

I stared off with the legs that were 25 inches long and 1.25 inches square. I set these up on my tapering jig on my table saw so that the blade would leave about a 3/4 ionch square at the bottom and disengage from the top at of the leg about 6 inches from the top. then carried on a cut all 4 legs with this taper.

Make a Bevel Cutting Jig for the Table Saw

Read Time: 6 mins

Hits: 12669

The table saw is easily my favorite tool. For me, it is amazingly versatile in what it can do and when you start adding jigs to it, the table saw can do some amazing things. I am currently on my fourth, and possibly my last table saw. Since none of my saw, including this one, hand the same fences, many of my jigs I have had to re-make, including this bevel cutting jig. Hopefully this version will also be my last because I am going to make it with a small amount of adjustability in mind. Something I neglected on my last versions. To be honest, the last versions of the Bevel Cutting Jig that I made, were all rushed together quickly to satisfy an immediate need. This one I am making without that immediate need and with the knowledge that I will be using it in the future.
The biggest problems I had in the past with this jig was - storage. All my jigs needed to be stored in an unheated outdoor shed. This means the wood moved a lot. In the winter it is cold and damp and the wood expands to around 14% moisture content. In the summer it's often hot and dry the wood shrinks down to 8%. Now all this is not huge, but when you are working with close tolerances, like on a metal table saw fence. A jig I make in the summer, will certainly not slide back and forth on the table saw fence in the winter, in fact, some won't even fit over the fence they have expanded so much.

Watch this and other similar videos on YouTube - https://youtu.be/r4FNdr1VO0M

This time I am going to select my wood carefully and make the part the slides over the table saw fence, slightly adjustable without having to take it apart and re-make it ...

Make a Wooden Sushi Tray with Sliding Dovetail Legs

Read Time: 5 mins

Hits: 6789

Anyone who knows their way around a kitchen will tell you that cooking and serving good food has as much to do with the presentation as it does with how good the food tastes. I think I would have to agree with that statement because when ever I find myself at any kind of a fancy eatery for whatever occassion it might be. The food is always served in a manner that makes it look as good as it tastes. Often this has to do with the combinations and colors of foods, but sometimes what it is served on makes a difference too.
And so it was that a recent trip to a favorite Sushi Bar inspired me to try my hand at  making serving tray for sushi, and well ... anything else that you might want to serve on it too, like pastries, vegetables or any combination of assorted foods.

What I wanted was something simple, but it still needed to have enough detail to make it interesting without taking away from the food, after all the tray is to enhance the food not distract from it.

Watch this and other similar videos on YouTube - https://youtu.be/Hq6OcwCOpl0

To start off with I wanted to platten part to be thick as this is part of the detail. A piece of 3/4" board would have worked as well, but something that is one inch thick makes more of a statement. I thought about what kinds of legs or stands I could use for a tray like this ...

Making a Wooden Cash Tray

Read Time: 4 mins

Hits: 8526

Working with cash and making change, especially for people who don't work with cast daily, it can be a stressful time ... making sure you give the correct change and not keeping people waiting. One of the things that can be be done is just making your cash more accessible and easier to see and count, just the same way retail clerks give change from their cash registers ... with a cash tray.
These are easy to make, but they do take a bit of time because there are a number of components, and you don't want to make they too big. The best way to start off is to determine how many slots for cash bills you want, and what the size of your money is. The size of your money and how many bays you want will determine the size of your tray and keeping in mind you may also want some change bins in case you are dealing with coinage.

Watch this and other similar videos on YouTube - https://youtu.be/2eUhWhZWg8g

I mad mine 2-3/4 inches high and that was plenty, I think 2 inches would be a better height if I ever had to do it again. I decided on 4 bays for paper money which also meant 4 bins for coins as these were used for the spacing with of the box.