How to Make Push Blocks for Table Saws, Router Tables and Jointers
- Read Time: 3 mins
- Hits: 14356
There are always pros and cons to making things yourself in your own workshop because sometimes they are better than what you can purchase commercially and other times they are not, and often it depends on the materials being used. Commercially we don't have access to some of the material for building things, like stronger plastics and resins. All we can rely on in most cases is wood and sometimes with some sorts of metal accessories or parts.
Watch it on Youtube: https://youtu.be/wKliiwTpSdM
These shop made Push Blocks are no different in terms of challenges, but in this case, although the materials may not seem as heavy duty, the end result is that they actually work much better than the commercial ones I have ...
5 Quick Finishing Hacks Part 2 - Woodworking Tips and Tricks
- Read Time: 6 mins
- Hits: 8653
The final step of creating a woodworking project is putting some sort of finish on it. Sometimes the finish is a clear coat of some product, other times it is opaque like a paint. In either case there is usually some sort of mixing and and cleaning process that needs to be done and not all of are in love with the process and some (me) have often taken short cuts.
Watch it on Youtube: https://youtu.be/vOwGiAQKykQ
I don’t often paint wood, but sometimes it is the only choice and if you do not mix paint fully, you can get streaking, patchy color and inconsistent texture, so mixing well is imperative. Mixing smaller quantities is easier but often we are mixing gallon pails or at least portions of them and all that paint needs to get mixed...
7 in 1 Router Jig / M.POWER CRB7 MK3 Router Base Review
- Read Time: 6 mins
- Hits: 85505
I don’t fall in love with tools very often but I’m making an exception for this Router Base Jig from M-Power Tools. The first thing I wondered was why is this called a CRB7, if you look on the box, it says Combination Router Base and the 7 just designates how many functions this jig can accomplish.
The base comes partially assembled but has some parts, depending on the router you have, that can be changed to make it fit better. It was at this point I began to see just how innovative this unit is.
Watch it on Youtube: https://youtu.be/TmdC0m5J8fU
Most router jigs that I have seen, you need to remove the plastic base from the router and re-attach it to the new base, and often, you need to drill and countersink new holes because there is no standard in router base attachment holes.
But this jig is different, it uses the rails that are often used for Edge Guide Adapters ...
How to Make a Wood Handle / Wooden Handles for a Woodworking Jigs
- Read Time: 3 mins
- Hits: 16025
Making jigs is fun, but sometimes they need their own handles, and often there are other reasons for wooden handles around the workshop I made a batch of them many years ago and over time they have been used up for various projects and it's time to make another batch of them that will hopefully last me a few years.
To make these, I am have laminated 3 - 1/4" pieces of hardwood together, Oak on the outside and maple on the inside to give me 2 laminated boards that are 5 inches wide and18 inches long. I will get 6 handles from each laminated board.
Watch it on Youtube: https://youtu.be/4XXHj7qqz-o
I prefer laminated wood for a project like this because laminated wood is often stronger than natural wood, and these handles will be screwed and glued to whatever they are attached to so I need to make sure that screws and glue will hold them ...
5 Quick Dust Collection Hacks: Woodworking Tips and Tricks
- Read Time: 7 mins
- Hits: 41852
Keeping dust in control as best we can is another very important part of woodworking. Making dust control easier encourages us to use it more and helps keep our workshops and our lungs more dust free. In this video, I am sharing just a few of the things I do that makes using my dust collection system and workshop vacuum more convenient and allows them to share accessories.
Watch it on Youtube: https://youtu.be/_B9pnCpXhP0
In a previous workshop, I had that was quite small, soon after setting up and ripping some wood, I soon noticed the shop was getting filled quite quickly with dust in the air. Rather than use a dust mask and keep on working, I simply left the workshop and shut the door and allowed the dust to settle and came back to it the next day. It was lesson dust control and when I returned to the shop it was with a single stage dust collector to see how much it could help dust control in my shop ...
Small Parts Holding Jig for the Table Saw / Wood Clamp Table Saw Jig
- Read Time: 4 mins
- Hits: 23749
Working with small parts can be one of the most dangerous things in woodworking. The problem is, that sometimes these little parts will eject out of your hand or pliers, and when they do, the pressure of your hand and arm can result in injury with a saw blade, router bit or even a belt or disc sander.
Easily the best way to handle small parts if from a bit of a distance and with a jig that supports them firmly and keeps your hands and limbs away from the cutting surfaces.
Watch it on Youtube: https://youtu.be/oIgEG8wViaU
To make this jig I used some bits of off-cut wood that was laying around the shop ... I made mine 17 inches long and 2 1/2 inches high with 3/4 inch lumber. The end cap was 5 inches wide ...
Page 51 of 103