Off Canvas sidebar is empty

Read Time: 5 mins
Hits: 3325

It's nice to see so many people from outside of North America sending in tips and in this episode are a couple more from European Countries, but tips are coming from all sorts of new sources and gives us all a fresh look at new ideas. 

Watch it on Youtube: https://youtu.be/W74LW1RNcRI

Sharing ideas in so many different formats means we all benefit and it enhances the community of woodworkers worldwide.

Read Time: 4 mins
Hits: 4516

I guess I am a bit of an accessory wood junkie, I love to see what's new, not just in tools, but in accessories. I am amazed at what people can come up with and I am equally amazed by things that I saw many years ago at wood shows, that I did not purchase, but now when I decide I want them they are now gone from the marketplace. 

Watch it on Youtube: https://youtu.be/a2VXspQycRo

Here are a few new items I have discovered and I decided to get in on them early ... or at least early for me, and pick up these items ... some new, some used.

Read Time: 6 mins
Hits: 6040

Many years ago I said that if you want to impress another woodworker, make a dovetail joint ... if you want to impress everyone else you can make box joints, and that is still true today. Most people cannot tell the difference and to an untrained eye, box joints and dovetail joints look pretty much the same, but box joints are much easier to make, and using a router means you can make very fine joints.

Watch it on Youtube: https://youtu.be/EzjG4bSrako

I first made this jig as a concept, I wanted to see if the same Lynn Sabin plans that created this jig well over 20 years ago, could be adapted to the router table. And it worked ... and it worked well. That jig I make many years ago worked fine so I didn't bother to make another ... until recently when I dug it out and found that some of the MDF and plywood that I used years ago, had cracked and the jig worked, but not smoothly. 

Read Time: 5 mins
Hits: 4183

Before we get started with this episode, I want to take some time here as well to acknowledge all the woodworking clubs and guilds who took me up on my offer to speak at their woodworking meeting over the past 8 months, during COVID and when most were having Zoom meetings. In all, I spoke to 23 US clubs, 2 in Canada and one in England. I did all these presentations for free, but some clubs insisted on gifting me something and I thank them all very much ... and all clubs who invited me to speak  ... I look forward to some time in the future when I may have a chance to meet in person at shows, meeting or other events.

Watch it on Youtube: https://youtu.be/6x5TkqSeu4M

This first tip, from Sylvain, is something I wished I had known about 30 years ago. I can't imagine how many times I have dropped nuts or washers when trying to fit them onto bolts that are in awkward places, and of course, the washers fall off as soon as you try to attach the nut ... 

Read Time: 4 mins
Hits: 13541

Full (or thick) Kerf versus Thin Kerf and what about Micro Kerf?  All the questions I get on blade kerf, including what size of blade should I use? Like many things when you know the answer it's easy, and when you understand the reasons "why" it just makes blade selection and blade purchases so much easier and ... getting the right blade for the right job. 

Watch it on Youtube: https://youtu.be/YZhpkqSuqEM

There are no standards on blade thickness, and some manufactures even vary the thickness, very slightly, within their own lines. Because of this, all thicknesses are given as approximate since thousandths of an inch or millimeter are typically insignificant. There are no secrets about blade kerf but there are pros and cons about what you should use and what you might need to purchase and to make things easier I have tried to lay things out in something of a point form ...  

Read Time: 5 mins
Hits: 2939

I love a good challenge and I certainly found it with this chair. I knew it was a bit complicated going in but when I drew the plans, I had a pretty good idea how I would be going about the build. I also knew that this could well be a prototype build, but I didn't really expect to abandon the build after pours hours and hours of work into it.

Watch it on Youtube: https://youtu.be/Wl1U1fYzaAo

Everyone makes woodworking mistakes and today I'll show you one of my woodworking fails in a wooden chair design I made. Hopefully, you can help me with this failed woodworking project and post your ideas in the comments section of this YouTube Video.

  1. Subscriber Submitted Woodworking Tips & Tricks - Episode 22
  2. How to Save Money Buying Lumber
  3. Subscriber Submitted Woodworking Tips & Tricks - Episode 21
  4. Best Results for Woodworking with OAK Wood
  5. 14 Masking Tape Tips in the Workshop

Page 18 of 103