Magnetic Switches for Jigs
- Read Time: 5 mins
- Hits: 23610
Innovation and woodworking go hand in hand. Despite the fact that woodworking is the second oldest profession, it has always been a place where new tools and ideas meet. Such is the case with the "Magswitch". If you aren't familiar with the Magswitch, it is simply a magnet that can be switched off and on. So if you place a magswitch on a steel table, like a table saw, and turn the switch, the magnets are energized, adhering the unit to the table. When the switch is turned off, the switch can be lifted off the table with same effort it takes to lift a screw driver off the table.
Magnetic Switches for Jigs
Having a tool that is quick and easy for making and adapting to jigs is a HUGE benefit in the workshop for saving time and for making more accurate cuttings, and that's just where the magswith is perfect ....
Comparing Box Joint Jigs
- Read Time: 6 mins
- Hits: 20454
One of the most recognizeable joints in woodworking is the dovetail joint. It has been around for centuries and is always associated with quality. In the past century one of the main purposes of dovetail joints is in making drawers, which is a real pity because dovetail joints are such a pretty joint they should really by "seen" more often. What many woodworkers don't realize is that as popular as dovetail joints are, they are often confused with another joint called "box joint", which is similar in design and look, but box joints have square pins and tails compared to dovetail which have angled pins and tails.
When comparing the two joints, the dovetail joint is easily the prettiest of the two but slighly more difficult to make. The dovetail joint It appears to take more time to make and just looks better. Among woodworkers, anyone who can actually hand-cut high quality dovetails are often held in high regard. One of the best people for hand cutting dovetail joints that I have had the pleasure of meeting and working in association with at woodworking shows is Rob Cosman. I can't imagine how many dovetail joints Rob must have cut in his lifetime, but the quality of his cuts is evidence that practice make perfect. Check out Rob's website for more information on dovetail joints at www.robcosman.com.
Now, back to the topic of box joints, and comparing the jigs and how to make them.
Comparing Box Joint Jigs
What most woodworkers don't realize is the most people who know a bit about fine furniture will call box joints dovetail joints. There is really only a small portion of the population that really know the difference. It's almost like what a woodworker told me once, "if you want to impress another woodworker, make a dovetail joint, if you want to impress the rest of the population, a box joint will work just fine". To back up his claim, I told him that I had been in a number of situations where people have called box joints dovetail joints, and he agreed and confirmed that only a very few, knowledgeable furniture experts have been able to identify the difference.
So, what are some of the best ways to make these joints, well, read on and we will show talk about them.
Using Anti-Slip Accessories in the Workshop
- Read Time: 3 mins
- Hits: 18245
One of the miracles of the last decade is the invention of anti-slip (or anti-skid depending on who you talk to) material. I`m not entirely sure what this material was invented for but has spawned a whole new realm of inventions and ideas. And that idea is what was the see for this article. An interactive video on what members are currently using this anti slip material for.
Using Anti-Slip Accessories in the Workshop
Comparing Saw Blade Quality
- Read Time: 1 min
- Hits: 9989
Working with wood can be challenging enough with out having to be fighting tools as well. One of the drawbacks of working with wood is that it is always moving due to moisture in the air that wood is constantly either absorbing or releasing depending on the humidity.
As woodworkers we are always striving to make the most accurate, and straightest cuts we can and that is why we purchase expensive machinery with highly accurate fences and micro adjustments, so that we can make perfect cuts. The reason we want perfect cuts is the wood is MUCH easier to work with when we work with flat, straight and right angle cuts. When these cuts are bad, wavy rough or otherwise at some sort of an angle, it either means wasted wood, or having to re-do of fill something, which costs more time and money.
Comparing Saw Blade Quality
One of the best investments is purchasing excellent quality table saw blades. Even if your saw is not the best in the world, you can still make excellent cuts if you have an excellent blade to work with. One of the features of a good blade is reduced vibration during cutting. A blade that is "dead" is far more likely to product a good, straight and accurate cut that one that wants to vibrate.
We decided to test some Freud blades with their non-stick Permashield trademark coating to see if this actually make any difference to the "resonance of the blade" ... have a look a the video and you will see that an excellent quality "dead" blade is not created that way with coating, but during the actual manufacture of the steel. There is no substitute for good quality tools
Revisiting Setting Jointer Knives
- Read Time: 5 mins
- Hits: 12220
One of the great things about woodworking is that there are often more than one way to accomplish things. This fact is true with setting jointer knives. There is really only one rule in setting jointer knives and that is NEVER let the knives fall below the height of the out feed table.
When this happens, when you joint wood, instead of your wood being nice and straight and flat, it will be flat but will come out "arced" and will look like your board has "sagged" along the edge that was just jointed. The lower the knives are from the out feed table the more exaggerated the arching or sagging will be. This of course makes it impossible to glue boards together, or in many case to even connect your wood together.
Revisiting Setting Jointer Knives
One of the tried and true methods I was taught many, many years ago was that when setting jointer knives the correct height is when you lay a steel ruler on the out feed table and slowly turn the jointer knives by hand, the knives will grab the ruler lift is slightly and move it ahead by about 1/8". This setting will joint or plane the board while leaving a very shallow amount of snipe at the back end of the board being jointed. (snipe is that small depression that jointers and planers can leave a the very end of boards).
Breaking Down or "Dressing" Rough Lumber
- Read Time: 5 mins
- Hits: 45424
The most economical way to purchase lumber is to buy green, rough cut lumber. Of course the disadvantage is that you have to dry it yourself, which takes time (yes this can take up to 3 or 4 years with some hardwoods), and then in order to make it useable, you need to break it down or "dress"; the lumber (at least in most cases) which simply means making it useable for woodworking projects.
The problem with this process is that frequently your wood will warp and bend as it dries, which is normal. Some wood will bend and move slightly while other pieces will bend wildly out of shape. Most lumber as it dries will bend and move in more than one plane creating what is termed a "propeller" shape.
Breaking Down or "Dressing" Rough Lumber
Dressing this lumber down can be a real hazard if you are not careful because of the the way the wood is warped, and especiallt if you are working with 8 or 9 quarter inch thick boards ( 2" - 2 1/2"). thinner lumber such as 4 quarter (one inch thick) is less a bit easier to work with but BOTH can be a hazard, and here'w why ....
Page 96 of 104