- Hits: 1392
It been many years since I used a cordless circular saw, I even remember the first one I ever used. I needed to cut a 12 inch strip off the long side of a 4'x8' sheet of 3/4" inch plywood at a wood show. I had borrowed a saw that the vendor told me had a full charge and I remember hoping the saw would finish the cut for me as I edged closer and closer to the end of the plywood sheet. It did finish the cut, but only barely.
Roll forward some 15 plus years and wow, things have changed and now I get to a second chance to work with a cordless circular saw. One of the big differences in recent years is the Lithium batteries that are so much better in than the old NiCad batteries. More power, longer charge, quicker charges, no memory etc. Battery improvements along with all the other technological improvements have allowed manufacturers to create whole suites of top quality and top performing tools that will easily rival power and durability of corded tools.
When I first picked up and tried the Makita Cordless Circular saw, it struck me instantly just how much better this tool was than than the first generation of cordless circ saws. I was doing a test cut through construction 2x5 stud. The balance of the saw was comfortable, when I started it up, it didn't "jerk" in my hand as I started the cut and when cutting the wood, it didn't bog down, but powered through like any corded saw would do. On closer examination, here's some of the features I found ...