Most Requested Topics
Free Woodwork Ebooks
- Hits: 1305
Shelving units are very popular, and for good reason, they are a great place to display special items that we have and in so doing they also add a lot to the decor of a room. Many shelving units have backs that make them appear stronger, and perhaps some are, but in most cases they are only holding smaller items so strength is not always needed.
In this build we are build something called a peekaboo shelf unit, probably so named because it is "backless". A very nice design that makes it appear a bit lighter and some even say "airey". What I particularly liked about this shelving unit is the cleat system that not only has a solid locking mechanism to keep it hanging firmly on the wall, the unit is easy to take down and the clean helps to add to the strength of the shelving unit.
For this unit I used standard 3/4" wide wood for everything except the partition between the drawers. I felt that 1/2 inch wide spacers looked better and fit the project a bit better.
- Hits: 1453
Making kitchen accessories in your workshop is both fun and rewarding because you can frequently make these items for a fraction of what they cost to purchase and they often last much longer, not to mention they can be made to be far more attractive than the run-of-the-mill commercial versions. For many woodworkers making these kitchen and dining accessories can turn into at least a part time and sometimes even a full time job in making these and selling them at craft fairs, swap meets and farmers markets.
Everyone loves pizza, which is why the Pizza Peel is such a popular item. It's especially valuable if you have younger children or for people who have limited mobility as the peel is a much safer and easier way of removing a pizza from a hot oven. The one I made had a little bit wider handle especially suited for this cause.
In my case I wanted to make mine look a bit more appealing than just using plain wood. I also wanted to laminate my to help make it a little bit stronger. The woods I selected ..
- Hits: 1189
Portable barbecues are handy because they can be easily transported to a variety of events, like birthday parties, family gathering, picnics, camping trips and much more. The disadvantage is that they need some sort of a stand to sit on to make them comfortable to use, but often there is a picnic table or something similar handy to use. Unless ... you want a dedicated stand for them, then you either need to purchase the accessory or make your own, which is what I did.
Initially I was a bit concerned about having a portable barbecue sitting on a wooden surface, but after using my own, on a wooden surface for 2 years not seeing any sign of even paint discoloring, I am pretty confident that wood works fine for my barbecue, others may not, so before you build your own, that will be something you will want to check. Regardless whether or not you use the table for a barbecue or not, it is still a great, solid little table that would be fine as a serving table to hold any number of food and drink items, or what-have-yous.
I started off with the legs, I wanted them to be at least 1" thick, just because a table looks more substantial with stronger legs. All the cross members are 3/4" material.
- Hits: 1545
I love learning new things about woodworking, and it seems that every day I learn something new. I especially love it when I find people who are doing things that are outside of what we normally expect, and wooden sign making is one of those areas.These are the kinds of people I like to highlight because they work hard and give freely of their information and knowledge.
For years I have assumed that really the only way to carve signs of any quality was to use a CNC machine, connected to a computer running special software, that can take quite a while to learn how to use. Some time ago I was shown that, with a little bit of practice, some fairly common tools and little bit of instruction, it is possible to makes some outstanding wooden signs.
Eric and Dave Rhoten, the father and son team, have spent many successful decades in the wooden sign making industry and are now showing how everyone how they can make their own wooden signs on their website davesigns.com and their YouTube Channel oldave100.
It seems like they have made about every kind of wooden sign that anyone has dreamed up because between them they have an enormous wealth of information. They are frequently releasing new videos that answer viewers questions on sign making and give tips, ideas and suggestions on the best way to make wooden signs. (and scroll down for direct links to their 2 videos on making the woodworkweb sign) ...
- Hits: 5246
I seem to go through phases where I have this need to re-organize my stuff and it's often triggered by an event. Recently I lost the little mounting foot that goes in the head of my small Gorilla Tripod. Oh sure you can buy new ones, and have them shipped to you but most of the ones I saw, with shipping, are about the same price a buying a whole new tripod! Eventually (2 months later) I have found the missing foot and all is well again, but it made me realize I have camera and video gear in at least 3 different places and it's time to get it all in one place ... the workshop where it is being used.
The real problem with all these bits and pieces is that they are currently being stored in little plastic rectangular trays, which work ok, but they take up a lot of shelf space because you can't store something above them like you can with a little cabinet with drawers. And that was my motivation.
I had some other ideas along the way, like having something with a Dutch Door or half door so that if you had something lying in front of the little cabinet, you could still open the door without knocking something on to the floor. I also liked ....
- Hits: 1344
When ever I get a number of similar questions, it tells me that there are a lot of other people out there who have the same question, but just haven't asked it yet, it also tells me that I may not have explained something clearly so it's time for me fix that, so here goes. There are 2 main questions I have had repeatedly for ... well ... a long time and I should have addressed them earlier instead of trying to answer emails and messages one at a time.
Question #1 - How do I know when you are releasing a new video? ... great question.
The answer is, I try to release a new video every Thursday morning (not I am not always successful at that goal). The BEST way to know when I release a new video is to go to my YouTube Channel and right next to the "Subscribe" button, is a little round GEAR. If you click on that GEAR it will pop up a new little window with a check box ... if there IS a check mark inside the box, it means you will receive an email every time I release a new video, with a direct link to that video. If there is NO check in the box, it means you will not be notified of any new video releases or any other channel information, so check the little box, then SAVE that change and watch for the next video release notification.
Question #2 - How can I find specific videos you released in the past?
Another good question. Currently I have something like 250 videos online so yes, it can be hard to find one specific video. The best way to do this is to go to woodworkweb.com to do a search for the video.
For every video I release I also write and article about that video. knowing this, it is now easier to find a video if you can recall a key word or a couple of key words from that video that would have been used in the article.
If you use the "Search" box in the upper right area of the woodworkweb.com website, you will be able to find that video by typing in a key word ... hit the return or enter key and every article in woodworkweb.com will be searched for that word or set or words.
To search for a set of words it is best to use quotes " " .
Such as "trim router" or "saw blade". Try NOT to look up words that are used commonly like router, wood, joint etc. as these will give too many responses for you to look through.
With that info you will all be able keep up-to-date with the latest videos, and be able to find older videos in much less time.
Thanks everyone for watching my videos, and to all of you who ask questions and those of you who help me by answering other people's questions ... these are an enormous help to me, so thanks everyone.