Transform Your Tools Instantly! Plasti Dip Revealed
- Read Time: 5 mins
- Hits: 2490
Plastic dipping tool handles to give them a better grip has been around for many, many years and to be honest, I have seen some pretty poor results from these so I thought it was time to try this out myself to see if the product is the problem or is it user problems??
Watch it on Youtube: https://youtu.be/gABvuo7OXxw
I read the instructions a few times and even did some research online to make sure I understood how this liquid product worked and hopefully I would get the best results from it ...
Secrets of Professional Wood Finishing Revealed!
- Read Time: 13 mins
- Hits: 2514
An important point to remember when selecting ANY woodwork finish is that no finish will last forever. All finishes will need to be refreshed or redone at some time in the future. Some finishes need to be re-done as early as 3 months, others can take 30 to 40 years or more before they need refreshing or redoing. The purpose of this article is to give new woodworkers some sort of a head start in trying to assess what direction they might want to go when it comes to finishing their woodworking projects and there is much more to learn.
Watch it on Youtube: https://youtu.be/9_VRPu5icZQ
So what decides whether a finish needs to be redone or refreshed? Whoever owns the piece at the time, if they are not happy with the finish, needs to be refinished for any number of reasons. Sometimes the woodworker used "green wood", full of water and as it dries it can lift off some finishes, maybe the finish has been worn off in patches just from normal wear and tear like chairs and dining tables, maybe the finish is just old, crackled or dull and has lost its luster, then it may be time to refresh it, so lots of different reasons and circumstances.
Make Your Own Wood Router Clamp!
- Read Time: 7 mins
- Hits: 3693
Not every suggestion I receive ends up in a video, often because I just don't have the capacity, but sometimes because what was sent, for some reason it may look like I would need to make a prototype of it before I video that tip, jig, or project. Such was the case with the wood router clamp.
Watch it on Youtube: https://youtu.be/lJjsj4ZVoPo
I can't take credit for this idea, it was sent to me compliments of the nice folks at the Sunflower Woodworking Guild in the Wichita, Kansas region, who have so kindly kept me on their member's list and send me newsletters and other club notices. What I received were some pictures and some plans from which to get started ...
Unbelievable Woodworking Tricks You Can't Miss - EP 38
- Read Time: 3 mins
- Hits: 3223
I am amazed at how many different woodworking tips, tricks, and ideas can morph themselves into different areas and grow to be used in other uses with other tools and techniques. So many of these ideas are transferrable to different uses.
Watch it on Youtube: https://youtu.be/ystG5sEbjDE
I don't frequent the dollar stores very often but when I do, I always take some time to see what's new or what has changed and there are invariably new things to see and to ponder to see what kinds of uses they could be in the woodwork shop ...
AMAZON TOOL HAUL: The Best Gadgets I've found.
- Read Time: 2 mins
- Hits: 17470
Watch it on Youtube: https://youtu.be/AnCnS2leZmU
Black Friday sales often drive out new and innovative products for the new season and into the future, it is also a time when we can save a bit of money on things ... or so I thought, when one item from my purchases of three was lost, I canceled the order and re-ordered about 2 weeks later, only to find that the small item I ordered was $15 cheaper than the Black Friday Sale - buyer beware I remind myself. But there they are, a new version of a clamping device that I often use when assembling or dry fitting projects, a very innovative speed square with some new kinds of features, that was surprisingly accurate, and the jig I will find most useful, a series of round-over templates for using my palm router to round over the corners of tables and similar items and get perfectly matched rounded corners. So check out tool deals from this Amazon Haul!
What's In Colin's Drawers? (Hint: It's Not What You Think!)
- Read Time: 3 mins
- Hits: 1491
I understand why so many people are interested in what's in my drawers because I am often interested in what other woodworkers have in their drawers that are not obvious, like what tools they have and how they arrange their drawers .. or even if they do arrange them.
Watch it on Youtube: https://youtu.be/3ermPNvgKxU
I have seen them all, drawers that are neat as a pin and organized like fine jewelry and drawers that are helter-skelter with seemingly no rhyme or reason, except in the mind of the woodworker ... and that is really all that counts ...
Page 7 of 103